ActionTec 56K ISA Lite User Manual page 10

5. Firmly, but gently, insert the modem into the available 16-bit expansion slot.
Ensure that the card is seated properly before securing it with the screw removed
in Step 4, as shown in the following diagram:
6. Put the chassis cover back on the computer.
7. Be sure that all power switches are in the OFF position, then reconnect the
power cables to the computer and its peripherals.
8. Connect the telephone line cable to the "Line (Telco)" jack as shown in Figure
7.
9. Turn on the computer and proceed to the following sections to configure your
modem to the operating system you are using.
Figure 6: Installing The Modem
9