Networking Of The Interfaces - Siemens SIMATIC TeleControl DNP3 Configuration Manual

Configuration
3.4 Configuration of interfaces, networks and network nodes
– MD720
– Third-party modem
3.4.2

Networking of the interfaces

Module interfaces
The arrangement of the module interfaces in the STEP 7 device symbol (network view)
corresponds largely to the structure of the respective device.
For example, the interfaces of a TIM 1531 IRC are arranged as follows:
Figure 3-1
Networking interfaces
To network an interface depending on the initial situation you have different options:
● Creating a subnet
● Connecting two target devices via a new subnet
● Connecting devices to existing subnet
● Selecting an existing subnet from the "Subnet" list
You will find the description of the individual methods in the STEP 7 information system.
38
The GSM modem MD720 is not supported because it uses frame format FT2.
Any compatible modem for the network types "Dedicated line" or "Dialup network"
(analog / ISDN / GSM)
Device symbol of the TIM with interface numbers
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3