System Time; Ntp; Web Server; C.5.3 System Time - Siemens SIMATIC TeleControl DNP3 Configuration Manual

WBM of the TIM 1531 IRC
C.5 System
C.5.3

System time

System time
The current system time of the TIM is displayed in the title bar of the WBM.
● Input box for time
Format: YYYY-MM-DD hh:mm:ss
In the input box, you can manually enter the time and transfer it to the TIM.
When making your entry, keep to the specified format.
Month, day, and hour can also be entered as single digits. Example: March is accepted
as "03" or as "3".
● Apply time of day
When you click this button, you transfer the time entered above to the TIM.
● Adopt PC time
When you click this button, the TIM adopts the time of day from the connected PC.
C.5.4

NTP

NTP
● NTP server list
Shows the addresses of the configured NTP servers.
C.5.5

Web server

Web server
● Disable Web server
Disables the Web server of the TIM. The setting is adopted in the configuration data of
the TIM.
Note
No HTTP/HTTPS connection to the TIM
If you disable the Web server of the TIM, you lose the possibility to access the TIM via
HTTP/HTTPS.
Access is only possible again after loading the configuration data (with enabled Web
server access).
172
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3