Fujitsu PRIMERGY User Manual page 32

Figure 1-1 shows an outward appearance of this card.
Jumper J2,
Jumper J4
68-pin connector for
external SCSI device
2
68-pin connector
for built-in SCSI
device
Figure 1-1 Outward appearance
Notes
・ Since this card supports the 68-pin connector for the external SCSI
device only, don't use the other SCSI connectors for connecting any
SCSI device.
・ Leave both the jumpers J2 and J4 of this card in their respective default
settings (short-circuited) without fail.
50-pin connector
for built-in SCSI
device
AIC-7880 SCSI protocol chip
LED connector
Host adapter LED