Overview - Fujitsu PRIMERGY User Manual

1 Overview

This card is for use with the PRIMERGY (simply called "SERVER"). This card
functions as an interface between the PCI bus of the server and an external differential
SCSI device.
Note
This card supports the externally connected differential SCSI device
(hereinafter called "SCSI device") only. Don't connect any single-end SCSI
device to this card, because it may damage the card. If the external SCSI
device cannot be distinguished into the differential type or the single-end
type, make sure of the type referring to the instructions of the SCSI device to
be connected.
This card incorporates the SCSISelect utility, which lets you easily change the card
settings.
The summarized specifications are given below:
Manufacturer's device type
Card type
Bus interface
External interface
Data transfer system
SCSI controller
Number of SCSI channels
Maximum transfer speed
Connector
* 1 SCSI-3 standardization is currently in progress.
Summarized specifications
ＡＨＡ−２９４４ＵＷ
SCSI-3 compliance (*1)
PCI V2.1 compliance
Ultra Wide Differential
Bus master DMA
ＡＩＣ−７８８０
One channel per card
Synchronous: 40 MB/s; and asynchronous: 6 MB/s
Internal SCSI 68-pin 16-bit connector (not supported)
Internal SCSI 50pin 8-bit connector (not supported)
External SCSI 68-pin 16-bit connector
E
1