Table of Contents
Advertisement
product moves back into the work area. The
factory setting is 30 cm. You can select a
distance of 20-30 cm.
To get access to the menu
1.
Do steps 1–3 in
on page 20 .
2.
Use the arrow button and the OK button to
move through the menu structure
Installation > Drive Past Wire .
3.
Use the arrow buttons to set the distance in
cm.
4.
Push the BACK button.
3.10.7 ECO mode
ECO mode stops the signal in the boundary loop,
the guide wire and the charging station, when the
product is parked or is charging.
Note: Use
ECO mode if the signal from the
charging station causes interference with other
wireless equipment, for example hearing loops or
garage doors.
Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
3.10.7.1 To set the ECO mode
To get access to the menu
1.
Do steps 1–3 in
on page 20 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
Installation > ECO mode .
3.
Push the OK button to select the
mode .
4.
Push the BACK button.
3.10.8 To avoid collisions with the
mower house
The wear on the product and the mower house
decreases when you select
collisions .
1.
Do steps 1–3 in
To get access to the menu
on page 20 .
2.
Use the arrow buttons and the OK button to
move through the menu structure
Installation > Mower house > Avoid house
collisions .
3.
Push the BACK button.
24 - Installation
Settings >
Settings >
ECO
Avoid house
Settings >
Avoid house collisions is selected it can
Note: If
result in grass that is not cut around the charging
station.
®
3.10.9 Automower
Connect@Home
The product can connect to mobile devices that
®
have the Automower
Connect app installed.
®
Automower
Connect is a free app for your
mobile device. The short-range interaction with
the product is called Automower
Connect@Home. When pairing between the
product and app has been confirmed, you have
access to the menus and functions as long as
you are within short-range (Bluetooth
3.10.9.1 To install the Automower
app
1.
Download the Automower
your mobile device.
2.
Register in the Automower
3.
Log in to your Husqvarna account in the
®
Automower
Connect app.
3.10.9.2 To pair Automower
product
To get access to the menu
1.
Do steps 1–3 in
on page 20 .
2.
Use the arrow buttons and the OK button
to move through the menu structure
> Installation > Connect@Home > New
pairing .
My mowers in the Automower
3.
Select
Connect app.
4.
Select the plus sign (+).
5.
Follow the instructions in the app.
3.10.10 General
General you can change the general settings
In
of the product.
3.10.10.1 To set the time & date
1.
Do steps 1–3 in
To get access to the menu
on page 20 .
2.
Use the arrow buttons and the OK button
to move through the menu structure
> General > Time & Date .
3.
Use the arrow buttons to set the time and
then push the BACK button.
4.
Use the arrow buttons to set the date and
then push the BACK button.
®
®
).
®
Connect
®
Connect app on
®
Connect app.
®
Connect and the
Settings
®
Settings
982 - 001 - 12.12.2018
Hide quick links:
Advertisement
Table of Contents
