Radius Accounting - D-Link DSR-150 User Manual

Section 8 - Security
Path: Security > Authentication > Radius Accounting
The Radius accounting page allows user to enable or disable the Radius Accounting feature and also to configure
Accounting Interim Interval (in seconds) at which the device sends the traffic statistics of a session in accounting
messages to the configured Radius Server.
To configure the router to connect to your RADIUS server:
1. Click Security > Authentication > Radius Accounting tab.
2. Complete the Radius Accounting information from the table below and click Save.
Field
Captive Portal
Radius Accounting Interim
Interval
Save
Cancel
D-Link DSR-Series User Manual

Radius Accounting

Radius Accounting
Select the check box to enable the radius accounting for captive portal feature.
The interim interval at which Radius Accounting (Interim-Update) packets should be sent by the
device. The value should be in the range 300 - 3600. By default, it is 300.
Click Save to save and activate your settings.
Click Cancel to revert to the previous settings.
Description
168