Intel® Amt - D-Link DSR-150 User Manual

Section 8 - Security
Path: Security > Firewall > Intel® AMT
Intel® Active Management Technology (AMT) allows you to remotely access and manage every networked
device, even those that lack a working operating system or hard drive, or are turned off as long as the computer
is connected to line power and to the network. Intel AMT uses a separate management processor that runs
independently on the client machine and can be reached through the wired or wireless network.
1. Click Security > Firewall > Intel® AMT.
2. Complete the fields from the table below and click Save.
Field
Ports
WAN Host
WAN Host Addresses
Internal IP Address
Reflector
Redirect to Port 16992-
16995
Redirect to Port 9971
Save
D-Link DSR-Series User Manual
Intel® AMT
When enabled, inbound/outbound firewall rules are added for certain ports to enable Intel AMT
service.
Select ANY to allow all hosts access or select Specify WAN IPs and enter IP addresses of hosts
(separate with a comma) you want to grant access to. Do not use spaces.
Enter a comma separated list of WAN IP addresses that must be allowed access to the Local Server
in case "Specify WAN IPs" is selected as the WAN Host. Only commas are allowed and there should
be no spaces between the comma and the IP address.
Enter the LAN IP address.
Toggle to ON to enable Reflector. This will send data back to the client on selected ports.
Toggle to ON to use the selected port. Enter the listening port on which the server will listen for
incoming connections.
Toggle to ON to use the selected port. Enter the listening port on which the server will listen for
incoming connections.
Click it to save your changes.
Description
201