D-Link DSR-150 User Manual page 305

Appendix D - Log Output Reference
Deleted EAP/TTLS context: OK
No more fragments in message. ERROR
Upper EAP sent us: method state = %d;
decision = %d
P2: sending fragment.
P2 send unfragmented message.
P1: sending fragment.
P1: sending unfragmented message.
\tTLSMsgLen = 0x%x
Send req ptr = 0x%x; Send resp ptr = 0x%x
P2 decision=(%d); methodState=(%d)
Default EAP: method state = %d; decision
= %d
TTLS pkt: data len=(%d) flags=(0x%x)
Got start
Got first fragment (n).
Got fragment (n).
Got last fragment
Got unfragmented message.
Got frag ack.
Rcvd. AVP Code-%u: flags-0x%x: len-%u:
vendorId-%u: "
MOD EAP: method state from upper = %d;
decision = %d
Got AVP len = %ul. Should be less than
16777215
AVP length extract: Error
pFB is NULL
Requesting message before assembly
complete
pFB is NULL
pFB is NULL
Buffer cannot hold message: ERROR
pFB is NULL: Error
pFB is NULL
TLS_FB* is NULL.
pFB->msgBuff is NULL.
Error calculating binary.
D-Link DSR-Series User Manual
DEBUG AVP code not recognized
DEBUG EAPAUTH_MALLOC failed.
DEBUG Converting password to unicode: Error
DEBUG Generating password hash: Error.
DEBUG Generating password hash hash: Error.
DEBUG Generating master key: Error.
Generating first 16 bytes of session key:
DEBUG
Error.n
Generating second 16 bytes of session
DEBUG
key: Error.n
DEBUG Converting password to unicode: Error
DEBUG Constructing failure response: ERROR
DEBUG Error checking authenticator response.
DEBUG Error generating NT response.
Username string more than 256 ASCII
DEBUG
characters: ERROR
DEBUG Invalid Value-Size.
Invalid MS-Length. Got (%d), expected
DEBUG
(%d)
DEBUG Error constructing response.
DEBUG Got type (%d), expecting (%d)
DEBUG Cannot handle message; opCode = %d
DEBUG EAPAUTH_MALLOC failed.
DEBUG tlsGlueCtxCreate failed.
client certificate must be set in the
DEBUG
profile.
DEBUG received TLS message length too big.
DEBUG total frags len > initial total TLS length.
DEBUG total frags len > initial total TLS length.
total data rcvd(%d) doesnt match the
DEBUG
initial "
DEBUG couldnt write %d data to TLS buffer.
invalid flags %s passed to
DEBUG
eapTlsBuildResp.
DEBUG EAPAUTH_MALLOC failed.
DEBUG tlsGlueCtxCreate failed.
DEBUG Context NULL: ERROR
DEBUG Setting profile to glue layer: ERROR.
DEBUG _eapCtxCreate failed.
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
291