D-Link DSR-150 User Manual page 167

Section 7 - VPN
3. Complete the fields in the table below and then click Save.
Field
GRE Tunnel Name
IP Address
Subnet Mask
Interface
Remote End Address
Enable DDP Broadcast Toggle to ON to enable DDP broadcasting.
IP Address
Subnet Mask
Gateway IP Address
Save
D-Link DSR-Series User Manual
Enter a name for the tunnel.
Enter the IP address of this endpoint. It will be referenced in the other router's static route as the Gateway
IP address.
Enter the subnet mask.
Select the interface to create this tunnel with from the drop-down menu.
Enter the WAN IP address of the endpoint router.
Enter the destination IP address of the static route from the remote LAN subnet.
Enter the subnet mask.
Enter the IP address of the termination router.
Click Save to save and activate your settings.
Description
153