Programmed Cooking Procedures - Smeg XXSC111P User Manual

Instructions for the User
7.5

Programmed cooking procedures

7.5.1 Timed cooking with timer
From ON status (see point «7.2 Operating modes»), press PT1 once. The
display will show the figures (constantly on) and the symbol
(flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A
few seconds after the required duration is set, the symbol will stop
flashing, and the countdown will start from that moment. Now select the
cooking function required and wait for the buzzer to sound, indicating that
the cooking time is over.
Press PT1 once to stop the buzzer. You can now set an additional cooking
time by turning PT1, or return to display of the current time by pressing
PT1 twice.
Press PT2 once to end the cooking process and switch the oven to OFF
status.
The minute minder also function works with no function set.
Warning: the minute minder function does not stop the cooking process. It
only warns the user that the preset number of minutes have passed.
To switch the oven off, press PT2.
Modifying the data set
Once the countdown has started, its duration can be changed while
cooking is in progress.
When the symbol is steady and cooking is in progress, press PT1
once. The symbol starts flashing and PT1 can be turned to change the
set duration. A few seconds after the last change, the symbol will stop
flashing, and the countdown will restart from the new value.
To change the preset temperature, wait for the symbol to become
steady and turn PT1 to the right or left to increase or decrease the cooking
temperature.
7.5.2 Semiautomatic cooking
Semiautomatic cooking is the function which allows a cooking operation to
be started and then ended after a specific length of time set by the user.
44