Programmed Cooking Procedures - Smeg SCA110 Manual

Hide thumbs

Table of Contents

Instructions for the User

7.5

7.5.1 Cooking with minute minder

From ON status (see point "7.2 Operating modes"), press PT1 once. The

display will show the

(flashing). Turn PT1 to set the minutes of cooking (from 00:01 to 23:59). A

few seconds after the required duration is set, the

flashing, and the countdown will start from that moment. Now select the

cooking function required and wait for the buzzer to sound, indicating that

the cooking time is over.

When cooking is over, to stop the buzzer and halt cooking, press PT2

once to switch the oven to OFF status.

The minute minder also works with no function set.

Warning: the minute minder does not stop the cooking process. It only

warns the user that the preset number of minutes have passed.

To switch the oven off, press PT2.

Modifying the data set

Once the countdown has started, its duration can be changed while

cooking is in progress.

When the

once. The

set duration. A few seconds after the last change, the

flashing, and the countdown will restart from the new value.

To change the preset temperature, wait for the

steady and turn PT1 to the right or left to increase or decrease the cooking

temperature.

7.5.2 Semiautomatic cooking

Semiautomatic cooking is the function which allows a cooking operation to

be started and then ended after a specific length of time set by the user.

Select a cooking function (see point "7.4 Selecting the function") and press

PT1 twice. The display will show the

(flashing).

Turn PT1 to the right or left to set the minutes of cooking (from 00:01 to

23:59). A few seconds after the required duration is set, the

stop flashing, and semiautomatic cooking will start from that moment. At

the end, the word STOP will appear on DSP1, cooking will stop and a

buzzer will sound; press PT1 to deactivate it.