Tune Adjustment - JRC JMA-9133-SA Installation Manual

4.2

TUNE ADJUSTMENT

Tune control of the transmitter and the receiver is conducted.
This adjustment is made at the installation and the replacement of magnetron.
Procedures
1) Open the [Service Man Menu] screen.
2) Open the [1.Tune Adjustment] screen according to the operation shown
below.
1. Adjust Menu
For how to input values on the value input screen, see Section 3.3.4 in the
instruction manual.
3) Operate the + or - button to set the tune adjustment value so that the tune
bar at the upper left on the screen is maximized.
4) Left-click the ENT button to confirm the value.
JMA-9100/7100 Installation Manual > 4.INITIAL SETTING > 4.2 TUNE ADJUSTMENT
→ 1. Tune Adjustment
4－ 7
4