Bosch DDU 9 Manual page 16

5 | Technical Data
16 / 148
Max. vibration
Electrical Data
Supply voltage
Inputs
Analog channels
Input range
Resolution
Switchable pull up resistor
Wheel speed inputs
Outputs
Sensor supply 5 V ± 1 % (250 mA)
Sensor supply 10 V ± 1 % (250 mA)
Sensor supply U_Bat 250 mA
Sensor ground
Environment
External switch for page selection, 12 steps
External switch for brightness adjustment or
page selection, 6 steps
Optional Upgrades
USB_DATA
USB-Port unlocked (Rugged USB flash drive
Bosch File System (BFS) format included,
works with Bosch File System (BFS) pre-
formatted USB Flash drive only)
Adapter cable to USB-Port (included in Up-
grade USB_DATA)
Adapter for wiring harness (included in Up-
grade USB_DATA)
CCP_MASTER
CCP-Master (ASAP2 file from ECU manufac-
turer required)
ETHER_TELE
LTE Ethernet Telemetry
FULL_LOG_1
Enable full logging performance of 3 GB par-
tition 1
FULL_LOG_2
Enable full logging performance of 1 GB par-
tition 2
I_O EXTENS
Enable additional 12 analog input channels
DDU 9
Vibration profile 1 (see Appendix or
www.bosch-motorsport.com)
5 to 18 V
4 standard, additional 12 optional
0 to 5 V
12 bit
For all ANA_IN
4 Hall-effect or DF11, switchable
2
1
1
4
B 261 209 658-01
B 261 209 659-01
F 02U V02 214-01
F 02U V01 343-01
F 02U 002 996-01
F 02U V02 213-01
F 02U V02 138-01
F 02U V02 304-01
F 02U V02 305-01
F 02U V02 205-01
Bosch Motorsport