▍
BIOS Setup
▶
Redirection After BIOS POST
This item specifies whether or not the console redirection is run after
the Power-On Self Test (POST).
[Always] Redirection is always active. (Some operating systems
may not work if this item is set to Always.)
[Boot Loader] Redirection is only active during POST.
[Disabled] Redirection is deactivated.
▶
Trusted Computing
▶
Security Device Support
This setting enables/disables BIOS support for security device. When
set to [Disable], the OS will not show security device. TCG EFI protocol
and INT1A interface will not be available.
▶
Security Configuration
Intel TXE Configuration
▶
TXE FW Version
This item displays the TXE firmware version. Read-only.
▶
TXE
This setting enables/disables the TXE function.
▶
TXE HMRFPO
This setting enables/disables the TXE HMRFPO (Host ME Region
Flash Protection Override) function.
▶
TXE Firmware Update
This setting enables/disables the TXE Firmware Update function.
▶
TXE EOP Message
This setting enables/disables to send EOP Message Before Enter OS.
3-14