MSI MS-98E3 Manual page 20

▍
Hardware Setup
Fan Power Connector: CPUFAN1 / SYSFAN1
The fan power connectors support system cooling fan with +12V. When
connecting the wire to the connectors, always note that the red wire is the
positive and should be connected to the +12V; the black wire is Ground
and should be connected to GND. If the mainboard has a System Hard-
ware Monitor chipset on-board, you must use a specially designed fan
with speed sensor to take advantage of the CPU fan control.
Important
•
Please refer to the recommended CPU fans at processor's official
website or consult the vendors for proper CPU cooling fan.
•
Fan cooler set with 3- or 4-pin power connector are both available for
CPUFAN1/ SYSFAN1.
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front audio panel located on
your computer case. This connector is compliant with the Intel® Front
Panel I/O Connectivity Design Guide.
2-8