▶
Super IO Configuration
▶
Serial Port 1/ 2/ 3/ 4/ 5/ 6
This setting enables/disables the specified serial port.
▶
Change Settings
This setting is used to change the address & IRQ settings of the
specified serial port.
▶
Mode Select
Select an operation mode for the serial port COM1.
▶
Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that gen-
erates a reset when the software that it monitors does not respond as
expected each time the watch dog polls it.
▶
FIFO Mode
This setting controls the FIFO data transfer mode.
▶
H/W Monitor
These items display the current status of all monitored hardware devices/
components such as voltages, temperatures and all fans' speeds.
MS-98E3
3-7