Belkin OmniView User Manual page 56

4-5 Device Settings
2. Network Miscellaneous Settings
2a. Remote Console and HTTPS Port
This is the port number at which the RIPM's Remote Console server and
HTTPS server are listening. If left empty, the default value will be used.
2b. HTTP Port
This is the port number at which the RIPM's HTTP server is listening. If left
empty, the default value will be used.
2c. Telnet Port
This refers to the port number at which the RIPM's Telnet server is listening.
If left empty, the default value will be used.
2d. Bandwidth Limit
This option refers to the maximum network traffic generated through the
RIPM Ethernet device (value in Kbps).
2e. Enable Telnet Access
Set this option to allow users to access the RIPM using the Telnet gateway
(see the "Telnet Console" section on page 32).
53
Menu Options