Vertex Standard VX-131 Service Manual page 17

CTCSS Ref. Modulation
Set the transceiver to "CH 2 (160.005 MHz)" via the
" CH " box.
Activate the CTCSS encoder with "67.0 Hz" Tone via
the " SUB AUDIO "parameter.
Double click the left mouse button on the "
Modulation " parameter to open the pop-up window.
Move the Slide bar, as need, so that the deviation meter
reading is ±0.8 kHz (± 0.1 kHz) deviation.
Click the the left mouse button on the [
in the new data.
DCS Deviation
CTCSS Ref.
OK
] box to lock
Set the transceiver to "CH 2 (160.005 MHz)" via the
" CH " box.
Activate the DCS encoder with "627" Tone Code via
the " SUB AUDIO "parameter.
Double click the left mouse button on the "
viation " parameter to open the pop-up window.
Move the Slide bar, as need, so that the deviation meter
reading is ±0.75 kHz (± 0.1 kHz) deviation.
Click the the left mouse button on the [
in the new data.
Alignment
DCS De-
OK ] box to lock
17