Vertex Standard VX-131 Service Manual page 15

Transmitter Output Power
Set the transceiver to "CH 2 (160.005 MHz)" via the
" CH " box.
Double click the left mouse button on the "
(2W) " parameter to open the pop-up window.
Move the Slide bar, as need, so that the power meter
reading is 2.0 W (± 0.1 W).
Click the left mouse button on the [
the new data.
MAX Deviation
RF Power
OK ] box to lock in
Set the transceiver to "CH 2 (160.005 MHz)" via the
" CH " box.
Inject a 1 kHz tone at –17 dBm to the MIC jack.
Double click the left mouse button on the "
viation " parameter to open the pop-up window.
Move the Slide bar, as need, so that the deviation meter
reading is ±4.2 kHz (± 0.1 kHz) deviation.
Click the left mouse button on the [
the new data.
Alignment
MAX De-
OK ] box to lock in
15