Table of Contents
Advertisement
Liquid crystal display (LCD)
Shows the characters and
graphic patterns.
Trigger switch (M3 key)*
Press this switch to start
bar-code reading.
Optical interface port
Used to exchange data/
programs with the host
computer via its integrated IR
port or via the optical
communication unit CU-7000.
Rechargeable
battery cartridge
Main power
source of the
BHT.
* The tirgger switch function is assigned to both of the M3 and M4 keys by default.
Components and Functions
Connector cover
Inside this cover is the
direct-connect interface
port.
Release button
Press this button to remove the rechargeable battery
cartridge.
Indicator LED
Illuminates in green when the BHT has
successfully read the bar code.
Trigger switch (M4 key)*
Press this switch to start
bar-code reading.
Bar-code reading window
Built-in antenna
Alphanumeric
keys
Hand strap
Be sure to put your hand
through this strap to
prevent you from dropping
the BHT accidentally.
Do not cover this
antenna section with
metal-evaporated tape
or by hand. Doing so
may result in
communications failure.
Advertisement
Table of Contents
