Denso BHT-7500W Operator's Manual page 24

Bar code handy terminal
Hide thumbs Also See for BHT-7500W:
Table of Contents

Advertisement

Your settings in
System Mode
have been lost.
Will reset
to defaults.
System down error!
type:XXXXXXXX R0 :XXXXXXXX
ercd:XXXXXXXX R1 :XXXXXXXX
inf1:XXXXXXXX R2 :XXXXXXXX
inf2:XXXXXXXX R3 :XXXXXXXX
R4 :XXXXXXXX
SR
:XXXXXXXX R5 :XXXXXXXX
PC
:XXXXXXXX R6 :XXXXXXXX
PR
:XXXXXXXX R7 :XXXXXXXX
R8 :XXXXXXXX
R9 :XXXXXXXX
R10:XXXXXXXX
R11:XXXXXXXX
R12:XXXXXXXX
R13:XXXXXXXX
R14:XXXXXXXX
R15:XXXXXXXX
Error in System Mode settings
Problem
Your settings made in System Mode contain an er-
ror.
If this error occurs, the System Mode settings
revert to the factory defaults.
The BHT displays this error for 3 seconds and
then displays the "No execution program
selected..." message.
Solution
Contact your system administrator.
System down error
Problem
An error has occurred during execution of System
Program.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
Solution
Unload and reload the rechargeable battery car-
tridge, then turn on the power.
If this error occurs frequently, contact your system
administrator.

Advertisement

Table of Contents
loading

Table of Contents