Adjusting The Lcd Contrast & Beeper Volume And Switching The Beeper & Vibrator - Denso BHT-7500W Operator's Manual

Bar code handy terminal

Hide thumbs Also See for BHT-7500W:

Table of Contents

Adjusting the LCD Contrast & Beeper Volume

and Switching the Beeper & Vibrator

While holding down the M1 or M4 key, press the PW key, and any of the

following screens will appear on the LCD. This screen will disappear if no

keys are pressed for five seconds.

LCD CONTRAST

BEEPER

BEEPER VOLUME

When the beeper is

selected (default)

Adjusting the LCD contrast

You can adjust the LCD brightness to eight contrast levels.

1) Use the

2) To decrease the contrast, press the

key.

Switching the beeper & vibrator

You may choose any of three ways—beeping only, vibrating only, or beep-

ing & vibrating as a confirmation of completion of bar-code reading.

(1) Use the

will be highlighted in any one of the following three states:

(2) Use the

LCD CONTRAST

When the vibrator is

selected

and

keys to select the LCD CONTRAST line.

and

keys to select the BEEPER VIBRATION line that

and

keys to highlight the desired way(s).

VIBRATION

(The current selection is highlighted.)

key; to increase it, press the

LCD CONTRAST

BEEPER VIBRATION

BEEPER VOLUME

When both the beeper

and vibrator are selected

Table of Contents