Denso BHT-7500W Operator's Manual page 4

Bar code handy terminal
Hide thumbs Also See for BHT-7500W:
Table of Contents

Advertisement

• Do not carry or store the recharge-
able battery cartridge together with
metallic ball-point pens, necklaces,
coins, hairpins, etc.
Doing so could short-circuit the ter-
minal pins, causing the batteries to
rupture or the battery fluid to leak,
resulting in a fire or bodily injury.
• Avoid dropping the rechargeable battery cartridge or letting it
undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rup-
ture or burn.
• Only use the dedicated charger (CU-
7001, C-700 or C-750) for charging
the battery cartridge.
Using a different type of charger
could cause battery-rupture or leak-
age of battery fluid and result in a
fire, bodily injury, or serious damage
to property.
• Never charge the rechargeable battery cartridge where any in-
flammable gases may be emitted; doing so could cause fire.
Handling the BHT
• The BHT-7500W uses a laser light for scanning bar codes. The
intensity of the laser light might be too low to inflict bodily in-
jury. However, do not look into the laser beam.
The BHT-7500W complies with Laser Safety Standard, Class II
of 21 CFR Chapter 1, Subchapter J.
The BHT-7500W does not mount beam attenuator and laser ra-
diation emission indicator required by this standard. Instead,
the software-controlled Magic keys (see "Components and
Functions") function as them because the laser light is not en-
abled without the Magic keys pressed.
WARNING
AVOID EXPOSURE-LASER LIGHT IS EMITTED FROM THIS APERTURE
C A U T I O N
LASER LIGHT-DO NOT STARE INTO BEAM
1mW MAXIMUM OUTPUT; 650nm LASER
CLASS II LASER PRODUCT
THIS DEVICE COMPLIES WITH 21 CFR CHAPTER 1, SUBCHAPTER J.
Charge only
with the
dedicated
device.
Undedicated
Do not
short-
circuit me!

Advertisement

Table of Contents
loading

Table of Contents