Operating Manual ERESCO MF4 Type Series
By using key F4 a further mask appears in which a new default value of the Film-Focal-
Distance can be entered.
By using the F2
key, the function key arrangement will be changed and the FFD
value will be displayed inversely:
It is possible to change the default value for the Film-Focal-Distance via the numeric
keypad.
Press the F4
key to accept the entry.
Press the F3
key to call up the default values stored in the unit:
After selecting the respective values, press the F4
key to accept the values and to display
the corresponding basic mask.
Press the F5
key to exit each menu without value changes.
Copyright by GE Sensing & Inspection Technologies GmbH
Bogenstrasse 41 D - 22926 Ahrensburg
08/24/2016
52
6. Edition, ID No.: 37020GB-F