GE ERESCO MF4 Series Operating Manual page 36

Operating Manual ERESCO MF4 Type Series
Press the F5 key to ensure the existing program is not overwritten.
Select another program number.
Press the F4 key to overwrite the existing program, the program mode appears on the
display.
It is possible to give each program a name with up to 20 characters:
(The entered program names will not assumed when saving the program into the X-ray
unit (see setup menu item 14 Memory location))
To achieve this, press the F1 key.
Copyright by GE Sensing & Inspection Technologies GmbH Bogenstrasse 41 D - 22926 Ahrensburg
08/24/2016
36
6. Edition, ID No.: 37020GB-F