GE ERESCO MF4 Series Operating Manual page 30

Operating Manual ERESCO MF4 Type Series
If the calculated values are to be saved as a program, press the F1 key, it is then
possible via the F2 key to save the calculated values as a program as described in
section 2.9.
By calling the previously saved program as described in section 2.10, it is possible to carry
out exposures with the calculated values in program mode.
To carry out exposures with the calculated values in manual mode, the function key
arrangement must be changed to standard mode by pressing the F1 key several
times:
Copyright by GE Sensing & Inspection Technologies GmbH Bogenstrasse 41 D - 22926 Ahrensburg
08/24/2016
30
6. Edition, ID No.: 37020GB-F