GE ERESCO MF4 Series Operating Manual page 38

Operating Manual ERESCO MF4 Type Series
Use the arrow keys  and  to select the desired program position and press the F4
key to save the program.
If a program already exists under the desired program number, the following message
appears:
Press the F5 key to ensure the existing program is not overwritten.
Select another program number.
Press the F4 key to overwrite the existing program, the program mode appears on the
display.
Copyright by GE Sensing & Inspection Technologies GmbH Bogenstrasse 41 D - 22926 Ahrensburg
08/24/2016
38
6. Edition, ID No.: 37020GB-F