Table of Contents
Advertisement
If the wheel positions on the vehicle are rota-
ted, the tire pressures may be displayed for
the wrong positions for a short time. This is
rectified after a few minutes of driving, and the
tire pressures are displayed for the correct
positions.
Restarting the tire pressure monitor
When you restart the tire pressure monitor, all
existing warning messages are deleted and the
warning lamps go out. The monitor uses the
currently set tire pressures as the reference
values for monitoring. In most cases, the tire
pressure monitor will automatically detect the
new reference values after you have changed
the tire pressure. However, you can also set
reference values manually as described here.
The tire pressure monitor then monitors the
new tire pressure values.
Set the tire pressure to the value recom-
X
mended for the corresponding driving situa-
tion on the Tire and Loading Information
placard on the driver's side B-pillar
(
page 270).
Y
Additional tire pressure values for different
loads can also be found on the tire pressure
table on the inside of the fuel filler flap
(
page 270).
Y
Make sure that the tire pressure is correct
X
on all four wheels.
Ensure that the SmartKey is in position 2
X
in the ignition lock.
Press the = or ; button on the steer-
X
ing wheel to select the
Press the 9 or : button to select
X
Tire
Tire Pressure
Pressure.
Press a.
X
The multifunction display shows the current
tire pressure for the individual tires or the
Tire pressure will be displayed
Tire pressure will be displayed
after driving a few minutes
after driving a few minutes
Press the : button.
X
The
Use Current Pressures as New
Use Current Pressures as New
Reference Values
Reference Values
multifunction display.
If you wish to confirm the restart:
Press a.
X
The
Tire Press. Monitor Restarted
Tire Press. Monitor Restarted
message appears in the multifunction dis-
play.
Serv.
Serv.
menu.
message.
message appears in the
After driving for a few minutes, the system
checks whether the current tire pressures
are within the specified range. The new tire
pressures are then accepted as reference
values and monitored.
If you wish to cancel the restart:
Press %.
X
The tire pressure values stored at the last
restart will continue to be monitored.
Tire pressure
Z
277
Advertisement
Table of Contents
