Mercedes-Benz SLC 300 2019 Operator's Manual page 205

Display messages
Tire Pressure Moni‐ Tire Pressure Moni‐
tor Inoperative No tor Inoperative No
Wheel Sensors Wheel Sensors
Tire Press. Moni‐ Tire Press. Moni‐
tor Inoperative tor Inoperative
Vehicle
Display messages
Shift to 'P' or Shift to 'P' or
'N' to Start Engine 'N' to Start Engine
Apply Brake to Apply Brake to
Shift from 'P' Shift from 'P'
To Shift out of P To Shift out of P
or N, Depress or N, Depress
Brake and Switch Brake and Switch
on Engine on Engine
Driver's Door Open Driver's Door Open
& Transmission Not & Transmission Not
in P Risk of Vehi‐ in P Risk of Vehi‐
cle Rolling Away cle Rolling Away
Only Select Park Only Select Park
(P) When Vehicle (P) When Vehicle
is Stationary is Stationary
Apply Brake to Apply Brake to
Select R Select R
Possible causes/consequences and M M Solutions
The wheels mounted do not have a suitable tire pressure sensor.
The tire pressure monitor is deactivated.
Mount wheels with suitable tire pressure sensors.
X
The tire pressure monitor is activated automatically after driving
for a few minutes.
The tire pressure monitor is faulty.
Visit a qualified specialist workshop.
X
Possible causes/consequences and M M Solutions
You have attempted to start the engine with the transmission in
position k or h.
Shift the transmission to position j or i.
X
You have attempted to shift the transmission to position h, k or
i without depressing the brake pedal.
Depress the brake pedal.
X
You have attempted to shift the transmission out of position j or
i into another transmission position with the engine switched off.
Depress the brake pedal.
X
Start the engine.
X
The driver's door is not fully closed and the transmission is in posi-
tion k, i or h.
A warning tone also sounds.
G
WARNING
The vehicle may roll away.
There is a risk of an accident.
When parking the vehicle, shift the transmission to position j.
X
The vehicle is moving.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Shift the transmission to position j.
X
You have attempted to shift from position h to position k.
Depress the brake pedal.
X
Shift the transmission to position k.
X
Display messages
203
Z