Table of Contents
Advertisement
Automatic transmission
126
Mercedes-AMG SLC 43
Transmission position
:
Drive program
;
The current transmission position and drive
program appear in the multifunction display.
Engaging park position P
When the vehicle is stationary, depress the
X
brake pedal.
Press button :.
X
Engaging park position P automati-
cally
Park position j is automatically engaged if:
you switch off the engine using the Smart-
R
Key and remove the SmartKey
you switch off the engine using the Smart-
R
Key or using the Start/Stop button and
open the driver's door or front-passenger
door
you open the driver's door when the vehicle
R
is stationary or when driving at a very low
speed and the transmission is in position h
or k
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position j if the HOLD function or Active Dis-
tance Assist DISTRONIC is activated. Observe
the information on the HOLD function
(
page 152) and on Active Distance Assist
Y
DISTRONIC (
page 147).
Y
Engaging reverse gear R
!
Only move the automatic transmission to
k when the vehicle is stationary.
Depress the brake and keep it pressed.
X
Push the selector lever forwards past the
X
first point of resistance.
The ECO start/stop function is not available
when reverse gear is engaged. Further infor-
mation on the ECO start/stop function
(
page 121).
Y
Shifting to neutral N
G
WARNING
If children are left unsupervised in the vehi-
cle, they could:
operate the vehicle's equipment
R
Additionally, children could set the vehicle in
motion if, for example, they:
release the parking brake
R
shift the automatic transmission out of
R
park position j
start the engine
R
There is a risk of an accident and injury.
Never leave children or animals unattended
in the vehicle.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. This
also applies for the Digital Vehicle Key if the
"Digital Vehicle Key" function is activated via
Mercedes me connect.
When the vehicle is stationary, depress the
X
brake pedal.
Push the selector lever forwards or back to
X
the first point of resistance.
If you switch the engine off with the transmis-
sion in position k or h, the automatic trans-
mission shifts to i automatically.
With the SmartKey: if you then open the driv-
er's door or the front-passenger door or
remove the SmartKey from the ignition, the
automatic transmission shifts to j automati-
cally.
Advertisement
Table of Contents
