Table of Contents
Advertisement
Avoid tire pressures that are too high in all
the tires, including the spare wheel.
Overinflated tires may:
increase the braking distance
R
adversely affect handling
R
wear excessively and/or unevenly
R
have an adverse effect on ride comfort
R
be more susceptible to damage
R
Maximum tire pressures
Example: maximum permissible tire pres-
:
sure
Never exceed the maximum permissible tire
inflation pressure. Always observe the recom-
mended tire pressure for your vehicle when
adjusting the tire pressure (
i
The actual values for tires are vehicle-spe-
cific and may deviate from the values in the
illustration.
Checking the tire pressures
Important safety notes
The tire pressure monitor does not warn you
of:
incorrectly set tire pressure
R
sudden loss of tire pressure, e.g. from a for-
R
eign object that has penetrated the tire
Observe the notes on tire pressure
(
page 270).
Y
page 270).
Y
Information on air pressure for the tires on
your vehicle can be found:
on the vehicle's Tire and Loading Informa-
R
tion placard on the B-pillar
on the tire pressure table in the fuel filler
R
flap
in the "Tire pressure" section
R
Checking tire pressures manually
To determine and set the correct tire pressure,
proceed as follows:
Remove the valve cap of the tire that is to
X
be checked.
Press the tire pressure gauge securely onto
X
the valve.
Read the tire pressure and compare it to the
X
recommended value on the Tire and Loading
Information placard or the tire pressure
table (
page 270).
Y
If the tire pressure is too low, increase the
X
tire pressure to the recommended value.
If the tire pressure is too high, release air.
X
To do so, press down the metal pin in the
valve, using the tip of a pen for example.
Then check the tire pressure again using the
tire pressure checker.
Screw the valve cap onto the valve.
X
Repeat these steps for the other tires.
X
Tire pressure loss warning system
(Canada only)
General notes
While the vehicle is in motion, the tire pres-
sure loss warning system monitors the set tire
pressure using the rotational speed of the
wheels. This enables the system to detect sig-
nificant pressure loss in a tire. If the speed of
rotation of a wheel changes as a result of a
loss of pressure, a corresponding warning
message will appear in the multifunction dis-
play.
You can recognize the tire pressure loss warn-
ing by the
Run Flat Indicator Active
Run Flat Indicator Active
Press 'OK' to Restart
Press 'OK' to Restart
appears in the
Serv.
Serv.
menu of the multifunc-
tion display. Information on the message dis-
play can be found in the "Restarting the tire
Tire pressure
message which
Z
273
Advertisement
Table of Contents
