Figure 3-34 Creating A Web Ip Filter List - SMC Networks SMC TigerStack IV SMC6224M Management Manual

C
ONFIGURING THE
• Start IP Address – A single IP address, or the starting address of a
range.
• End IP Address – The end address of a range.
• Add/Remove Filtering Entry – Adds/removes an IP address from
the list.
Web – Click Security, IP Filter. Enter the IP addresses or range of
addresses that are allowed management access to an interface, and click
Add IP Filtering Entry to update the filter list.
3-76
S
WITCH

Figure 3-34 Creating a Web IP Filter List