How to Install Your SOHO KVM Switch
Note: Before installing your SOHO KVM Switch, verify that your
USB keyboard and mouse work properly with all computers you
will be connecting.
Connecting Your Console
Step 1
Connect the video cable attached to your monitor and connect it to the DVI
monitor port on the back of your SOHO KVM Switch. See Fig. 1.
Step 2
Connect your keyboard and mouse cables to the keyboard and mouse USB
ports on the back of your SOHO KVM Switch. See Fig. 1.
Step 3
Connect your speaker and microphone cables to the speaker and
microphone jacks on the back of your SOHO KVM Switch (optional).
See Fig. 1.
DC 5V, 2.5A
audio
mic
Console
Device B
Device A
USB 04
Fig. 1
PC 4
PC 3
PC 2
audio
mic
USB 03
audio
mic
USB 02
audio
(F1DD104U model shown)
PC 1
mic
USB 01
audio
mic
1
2
3
4
5
6
7
7