Belkin F1DD102L User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Switch
  5. OmniView SOHO F1DD102L
  6. User manual

Belkin F1DD102L User Manual

Soho kvm switch with audio
Hide thumbs Also See for F1DD102L:
Table of Contents

Advertisement

Quick Links

SOHO KVM Switch
with Audio
DVI with USB Console and Host Support

User Manual

F1DD102L
F1DD104L

Advertisement

Table of Contents
loading

Related Manuals for Belkin F1DD102L

Summary of Contents for Belkin F1DD102L

  • Page 1: User Manual

    SOHO KVM Switch with Audio DVI with USB Console and Host Support User Manual F1DD102L F1DD104L...

  • Page 2: Table Of Contents

    Feature Overview ... 2 Equipment Requirements ... 3 Unit Display Diagrams ... 4 Specifications ... 5 Installing the KVM Switch ... 6 Pre-Configuration ... 6 Connecting the KVM Switch ... 7 Audio and Microphone Connections ... 9 Powering Up the Systems ... 10 Using the KVM Switch ...

  • Page 3: Introduction

    Introduction Congratulations and thank you for purchasing Belkin’s SOHO KVM Switch with Audio. The KVM Switch lets you share one DVI-D monitor, and one USB keyboard and mouse, with up to four computers. Designed to organize and save your desk space, the KVM Switch sits neatly on your desk to reduce clutter.

  • Page 4: Overview

    USB peripheral devices, such as a printer, with all your computers. There are two USB ports on the KVM Switch. One port is located on the back and the other is located on the front for easier access.

  • Page 5: Equipment Requirements

    Overview Equipment Requirements Operating Systems SOHO KVM Switches with Audio are for use on CPUs using: Platforms Mac OS * X v10.x ® Windows 2000, XP, Vista , Server 2003 ® ® Linux ® Novell ® *with USB support Keyboards Supports 101-/102-/104-/107-key keyboards Mice Mice with 2, 3, 4, or 5 buttons,...

  • Page 6: Unit Display Diagrams

    Overview Unit Display Diagrams KVM Switch front panel USB Hub Port 1 back panel front panel Audio/Mic Switch back panel 4th Computer Port Port Indicators front panel Additional Computer Audio/Mic Console Jacks back panel front panel DC Power Jack back panel...

  • Page 7: Specifications

    Operating Temp: Storage Temp: Humidity: Warranty: Note: Specifications are subject to change without notice. F1DD102L, F1DD104L 9V, 1A DC adapter with center pin-positive polarity 2 (F1DD102L), 4 (F1DD104L) DVI-D 1920x1200 3.5mm jack DVI-D 4 (F1DD102L), 8 (F1DD104L) High-impact plastic F1DD102L 12.5 (L) x 5.5 (W) x 5.5 (D) in.

  • Page 8: Installing The Kvm Switch

    Pre-Configuration Where to Place the KVM Switch The compact size of the KVM Switch makes it perfect for desktop placement. Consider the following when deciding where to place the KVM Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor;...

  • Page 9: Connecting The Kvm Switch

    Installing the KVM Switch Connecting the KVM Switch The KVM Switch is a plug-and-play device for installation. For a quick start on installation and operation, please follow the instructions below for the setup sequence: Step 1. Connect the shared keyboard,...
  • Page 10 Step 4. Disconnect the monitor that is connected to the console port of the KVM Switch. Step 5. Connect the new monitor you wish to use to the console port of the KVM Switch. Step 6. Plug the power supply into the back of the KVM Switch.

  • Page 11: Audio And Microphone Connections

    Installing the KVM Switch Audio and Microphone Connections Note: Speakers and microphones are not required for use of your KVM Switch Connect the Audio Step 1. Using the audio cable attached to your speakers, connect the male 3.5mm plug to the lime audio jack in the “Console” section of the KVM Switch.

  • Page 12: Powering Up The Systems

    Once all cables have been connected, power up the CPUs that are attached to the KVM Switch. All computers can be powered on simultaneously. The KVM Switch emulates a mouse and keyboard on each port and allows your computer to boot normally. Your KVM Switch should now be ready for use.

  • Page 13: Using The Kvm Switch

    Pushing the button in the center switches both the KVM Switch and audio for that specific computer at the same time. • Pushing the KVM LED on the left of the button allows you to switch just your USB keyboard, video, and mouse to another connected computer. •...

  • Page 14: Hot-Key Preceding Sequence Configuration

    Using the KVM Switch Hot-Key Preceding Sequence Configuration For users who want to use a preceding sequence other than two consecutive Scroll Locks, there is also one convenient way to configure it. 1. Press “ScrLk” + “ScrLk” + H, and a beeping sound will signal readiness for...

  • Page 15: Hot-Key Quick-Reference Table

    For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot-Key Quick-Reference Table below. 2-/4-Port SOHO KVM Switch with Audio -- & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons * user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL...
  • Page 16 Computer LED status (3 states: Lit/Flashing/Off). Lit = Active port with link established between KVM Switch and computer (via USB interface); Flashing = Active port but with no link established between KVM Switch and computer; Off = Non-active port. Audio LED status (2 states: Lit/Off). Lit = Active port for audio output;...

  • Page 17: Switching The Audio/Mic

    Using the KVM Switch Switching the Audio/Mic The audio/mic is independent to the KVM Switch and can be switched independently. This means that if you are working on port 1 of the KVM Switch, you can be listening to your music on port 3.

  • Page 18: Firmware-Upgrade Guide

    KVM Switch and plugged in directly to the host computer. The computer that is connected to port 1 of the KVM Switch will be performing the upgrade and will be referenced as the “Host PC” for this process.

  • Page 19: Upgrade Using The Windows Version Utility

    Ensure that the power adapter is connected to the KVM Switch. Check to make sure that the KVM cables for port 1 remain connected to the KVM Switch and the USB connector at the other end is plugged into a USB port on the host PC. The monitor connector is not used.
  • Page 20 Step 4. Double-click the icon of “Belkin Soho.exe”, the firmware-upgrade utility program. A warning message box may appear if you have antivirus software running on the PC.
  • Page 21 Firmware-Upgrade Guide Connect your KVM Switch to the Host PC Step 5. Now press the first front-panel button on the KVM Switch until you hear three beeps. The KVM Switch has now entered into the upgrade mode. Step 6. Check to make sure the KVM cables from port 1 are connected to the host PC.
  • Page 22 Begin the File Upload Note: Before hitting the “Upgrade” button on the utility program, you should make sure that you are focused on port 1 of the KVM Switch where you have the computer connected. If not, switch to that computer before hitting the “Upgrade”...

  • Page 23: Upgrade Using The Mac Version Utility

    Firmware-Upgrade Guide Step 9. Finally, unplug the power cable from the back of the KVM Switch and all other cables from the KVM Switch, and perform a cold reset. Reconnect all the cables again to the KVM Switch. Now you can enjoy the newly added functionality and compatibility of the new firmware version.
  • Page 24 Step 3. Double-click the icon of “Belkin Soho.pkg”, the firmware-upgrade utility program, and a message box appears that will guide you through the installation process.
  • Page 25 Then go through the guided steps to install the upgrade utility. After you have installed the program, you can find the upgrade-utility icon in the “Application” folder. Step 4. Now, double-click the “Belkin Soho” icon to activate the upgrade utility. Now the upgrade utility program is ready.
  • Page 26 Firmware-Upgrade Guide Connect your KVM Switch to the Mac Host Step 5. Press the first front-panel button on the KVM Switch until you hear three beeps. Now the KVM Switch has entered into the upgrade mode. Step 6. Check to make sure the KVM cables from port 1 are connected to the Mac host.
  • Page 27 Note: Before clicking on the “Upgrade” button on the utility program, you should make sure that you are focused on port 1 of the KVM Switch where you have the Mac host connected. If not, switch to that port before clicking the “Upgrade”...
  • Page 28 Note: After you have finished the firmware-upgrade process, try the port switching and other functionalities of the KVM Switch to see whether it works fine with the new firmware. If it does, then this upgrade process was successfully completed.

  • Page 29: Faqs

    What does flash-upgrade capability mean? You can update your KVM Switch firmware with flash upgrades, when needed, by going to belkin.com. This ensures that your KVM Switch works with the most current computers and devices. How does the KVM Switch allow the user to switch between ports? The KVM Switch supports two methods of port selection.
  • Page 30 Can I use the KVM Switch to switch video signals only? Yes, you may use the KVM Switch to switch between video signals only without having to connect the keyboard and mouse. The keyboard and mouse should be connected directly to the computer that the video signal is taken from to ensure that your computer functions properly.

  • Page 31: Troubleshooting

    KVM Switch for the appropriate port. • If you are using the KVM Switch for video switching only and have no keyboard and mouse connection between the KVM Switch and PC, you will need to purchase the optional 9V DC, 600mA power adapter (F1D065-PWR for your appropriate country).
  • Page 32 • If you are using the keyboard software that was included with your keyboard, uninstall it and install the standard Microsoft keyboard driver. MOUSE Problem: Mouse is lost when I switch to a different channel. Solution: • C heck that the mouse you are using is connected properly to the console of the KVM Switch. • If you are using a mouse driver that was included with your mouse, uninstall it and install the standard Microsoft mouse driver.
  • Page 33 • M ake sure it is plugged in properly. • Make sure the mouse works when directly plugged into the computer. Rebooting may be necessary when trying this. • Try a different mouse. Problem: When I switch from one port to another, mouse movement is completely erratic. Solution: • M ake sure you do not have more than one mouse driver installed. • Make sure that the driver is either for a standard USB mouse or a PS/2 or USB mouse compatible with Microsoft. • Avoid moving the mouse or pressing the mouse button when switching ports on the KVM Switch.
  • Page 34 PC keyboard may be reversed. All major keys will function as labeled. AUDIO AND MICROPHONE Problem: I have connected the speakers to the KVM Switch and I am not getting any sound from my computer. Solution: • Check that the sound is enabled on the computer by going into the system setting.

  • Page 35: Firmware-Upgrade Troubleshooting

    (longer than five minutes), there might be some problem. If so, simply unplug all the cables from the KVM Switch and start the whole firmware-upgrade procedure again as described in the Firmware-Upgrade Guide.

  • Page 36: Information

    FCC Statement Declaration of Conformity with FCC Rules for Electromagnetic Compatibility We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products: to which this declaration relates: Comply with Part 15 of the FCC Rules. Operation is subject to the following two...
  • Page 37 What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products.
  • Page 38 Information Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
  • Page 39 +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax © 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries. Windows, Windows Vista, and Microsoft are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

This manual is also suitable for:

F1dd104l

Table of Contents