Searching For A Mobile Phone - Mercedes-Benz AMG GT S 2016 Operator's Manual

Procedure and general information
Searching for and authorizing (connect-
ing) a mobile phone
Before using your mobile phone with
COMAND for the first time, you will need to
search for the phone ( page 175) and then
Y
authorize it ( page 176). Depending on the
Y
mobile phone, authorization either takes
place by means of Secure Simple Pairing or by
entering a passkey. COMAND automatically
enables the procedure suited to your mobile
phone. You can recognize Secure Simple Pair-
ing by a code which is displayed in COMAND
and on the mobile phone. You can recognize
the passkey system by the fact that you have
to enter a code on the mobile phone and in
COMAND. The mobile phone is always con-
nected automatically after authorization.
If COMAND does not detect your mobile
phone, this may be due to particular security
settings on your mobile phone. You can also
start the search procedure and authorization
on the mobile phone ( page 177).
Y
Device-specific information on authorizing
and connecting Bluetooth
phones can be found on the Internet at
http://www.mercedes-benz.com/
connect.
You can authorize up to 15 mobile phones.
Only one mobile phone can be connected to
COMAND at any one time.
De-authorizing (disconnecting) a mobile
phone
The connection is terminated automatically if
you leave the receiver range of COMAND or
deactivate Bluetooth ® on your mobile phone.
If you no longer want the Bluetooth
tion to be established automatically, the
mobile phone must be de-authorized (discon-
nected) ( page 178).
Y

Searching for a mobile phone

Select
X
bar.
To switch to the menu bar in the telephone
X
menu: slide 6 the controller.
To select
X
the controller.
The device list is displayed.
To select
X
press the controller.
A message is displayed that Bluetooth
must be activated on the mobile phone and
must be made visible to other devices.
To select
X
®
-capable mobile
troller.
The available mobile phones are displayed
in the device list.
The duration of the search depends on the
number of Bluetooth
range and their characteristics.
If a new phone is found, it appears in the
device list with the Ï symbol. You can now
authorize (connect) the mobile phone found
(
Y
If the device list is already full, you will be
requested to de-authorize a mobile phone
® connec-
(
Y
When you call up the device list again, de-
authorized devices will be removed from the
list. To update the device list, start the search
again.
COMAND operating system
TEL/®/Phone
in the main function
Connect Device: turn and press
Search for Phones: turn and
Start Search: press the con-
® telephones within
page 176).
page 178).
175
®
Z