Searching For A Mobile Phone - Mercedes-Benz MY17 c-class Operator's Manual

Calculating the route
Prerequisite: the address has been entered and
is in the menu.
Select Start or Continue.
X
The route is calculated with the selected route
type and the selected route options.
If route guidance has already been activated,
a prompt will appear asking whether you wish
to end the current route guidance.
Select Yes or Set as Intermediate Des‐
X
tination.
Yes cancels the current route guidance and
starts route calculation to the new destina-
tion.
Set as Intermediate Destination
the new destination in addition to the existing
destination and opens the intermediate des-
tinations list.
Connecting a mobile phone
Prerequisites
For telephony via the Bluetooth
®
require a Bluetooth -capable mobile phone. The
mobile phone must support Hands-Free Profile
1.0 or above.
Multimedia system:
Select VehicleQSystem Set‐
X
tingsQActivate
®
Activate Bluetooth
X
Mobile phone:
®
Activate Bluetooth
X
®
tooth visibility for other devices (see the
manufacturer's operating instructions).
®
The Bluetooth device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
ing information will be transmitted after you
connect:
Phone book
R
Call lists
R
Messages
R
adds
®
interface, you
Bluetooth.
O.
and, if necessary, Blue-
®
profiles, the follow-
Operating system
i
Further information on suitable mobile
phones can be obtained on the Internet at:
http://www.mercedes-benz.com/
connect
i
In the USA you can also contact the
Mercedes-Benz Customer Assistance Center
at 1-800-FOR-MERCedes (1-800-367-6372).
In Canada, you can get in touch with the Cus-
tomer Relations Center on 1-800-387-0100.
Searching for and authorizing a mobile
phone
Before using your mobile phone with the multi-
media system for the first time, you will need to
search for the phone and then authorize (con-
nect) it. Depending on the mobile phone, author-
ization either takes place by means of Secure
Simple Pairing or by entering a passkey. The
multimedia system automatically makes the
procedure that is relevant for your mobile phone
available. The mobile phone is always connec-
ted automatically after authorization. Further
information on using a mobile phone with the
multimedia system (see the Digital Operator's
Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.

Searching for a mobile phone

Audio 20:
Select Tel/®QConnect
X
DeviceQSearch for PhonesQStart
Search.
The available mobile phones are displayed.
COMAND:
Select PhoneQConnect
X
DeviceQSearch for PhonesQStart
Search.
The available mobile phones are displayed.
265
Z