Dynamic Select Controller - Mercedes-Benz AMG GT S 2016 Operator's Manual

DYNAMIC SELECT controller

104
Setting the volume:
Press button :.
X
If you select the loudest setting, indicator
lamp ; lights up.
You can also adjust the position of the
exhaust flap using:
the DYNAMIC SELECT controller
R
( page 104)
Y
COMAND
R
Problems with the engine
You can find information about this in the
Digital Operator's Manual.
DYNAMIC SELECT controller
General information
Select the drive program using the DYNAMIC
SELECT controller.
Available drive programs:
C Comfort
Comfort-oriented, opti-
mum-economy engine and
transmission settings
S Sport
Sporty engine and trans-
mission settings
S+ SportPlus
Especially sporty engine
and transmission settings
Race
Maximum sportiness and
engine and transmission
settings suitable for the
racetrack
I Individual
Individual settings
Depending on the drive program selected the
following vehicle characteristics will change:
the drive (engine management)
R
the transmission management
R
ESP ® ( page 63)
Y
R
the suspension ( page 124)
Y
R
the position of the exhaust flap
R
( page 103)
Y
the availability of the ECO start/stop func-
R
tion ( page 103)
Y
the availability of gliding mode (see Digital
R
Operator's Manual)
Further information for automatic drive pro-
gram characteristics ( page 106).
Y
Additionally, in drive program I you can set
the respective vehicle characteristics using
COMAND. You can find information about this
in the Digital Operator's Manual.
Each time you start the engine with the
SmartKey or the Start/Stop button, drive pro-
gram C is activated. For further information
about starting the engine, see (
Selecting the drive program
page 101).
Y