Automatic Transmission Remote Start Function; Manual Transmission Remote Start Function (Reservation Mode) - Firstech 2W902R-SP User Manual

arming mode.
While in passive mode, the system will lock and arm the alarm 30 seconds after the last door is closed.
As an indicator that the vehicle is going to passively lock and arm, the remote and siren will chirp once
and the parking lights will flash once at both 10 and 20 seconds prior to passively locking and arming. If
you want the system to passively arm and not passively lock, ask your local Firstech dealer to turn
Option 1-8 to setting II.

Automatic Transmission Remote Start Function

Hold the Key/Start
are in range and the vehicle is ready to remote start, the remote will beep once and LED flash blue
indicating that the remote start command has been successfully transmitted.
If you are in range and the remote beeps three times, there is a remote start error. Refer to the "remote
start error diagnostic" on the last page of this manual for details.
Upon receiving confirmation that your vehicle is running, the remote LED will flash the and
remote beep to show the run time. The remote start run time can be programmed for 3, 15, 25,
or 45 minutes - ask your local Firstech dealer to adjust Option 2-7 if you would like a run
time other than 15 minutes (default).
IMPORTANT: Your vehicle's key must be inserted into the ignition and turned to the "on" position prior
to driving your vehicle. If the foot brake is depressed prior to the key being in the "on" position, the
vehicle will shut off.

Manual Transmission Remote Start Function (Reservation Mode)

In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode.
Reservation Mode must be set each and every time you want to remote start a manual transmission
vehicle. The purpose of Reservation Mode is to leave the transmission in neutral before exiting the
vehicle.
IMPORANT:

The transmission must be left in the neutral position.

The vehicle's windows must be rolled up.

The vehicle's door pins must be in working order.

Do not install this remote start on a manual transmission vehicle that has a convertible or
removable top.

Do not set reservation mode or remote start with people in the vehicle.
Activating Reservation Mode
STEP 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking
brake, and remove pressure from the foot brake.
STEP 2: Remove the key from the vehicle's ignition. The vehicle's engine should remain running even
after the key has been removed. If the vehicle does not remain running visit your local authorized
Firstech dealer for service.
STEP 3: Exit the vehicle and close the door. The vehicle's doors will lock/arm and then engine will shut
down. If the vehicle's engine does not shut off, your door trigger may be functioning improperly. Do not
use the remote start feature and take your vehicle to a local authorized Firstech dealer for service.
button for 2.5 seconds to remote start an automatic transmission vehicle. If you
9