Function Button Menu; Remote Option Menu Table; Remote Led Functions And Descriptions - Firstech 2W902R-SP User Manual

and Key
2.5
Icon> Accesses Remote Option Menu. See Remote Option Menu Table for details.
seconds

Function Button Menu

Button Duration
<Insert
Function
One Tap
Icon>

Remote Option Menu Table

Turns Feature
Feature
On or Off
<insert Trunk
Enter and Exit
+ Key button
Remote Menu
icon>
2 Way Paging <insert Lock
Display icon>
<insert Unlock
Silent
icon>
<insert Trunk
nd
2 Car Mode
icon>
<insert
Automatic Button
Key/Start
Lock
icon>

Remote LED Functions and Descriptions

Your remote will communicate to and from your vehicle while in range. The LED will change colors
indicating transmission, confirmation, remote start run time and error confirmations.
Event
Runtime Remaining:
100 Percent
Runtime Remaining:
66 Percent
Runtime Remaining:
33 Percent
All command
confirmations
All error
confirmations
<Insert Lock
<Insert Unlock Icon>
Icon>
Drive Lock
Turbo Timer On/Off
On/Off
Button Remote
Duration Chirp(s)
2.5 Three On |
Seconds Three Off
One-Half
Half
Paging | Two-
second
Full Paging
Half One On | Two
second Off
Half One On | Two
second Off
Half One On | Two
second Off
LED Color
Blue
Purple
Red
Blue
Red
<Insert
Trunk
Icon>
Auxiliary 1
Enters and Exits Remote Option Menu. The LED will flash purple.
Determines whether your remote is used for Alarm or Start Only
system. Set it to FULL for ALARM IT and MAX IT features. Set to
HALF for START IT ONLY systems. If on, LED will flash blue.
When turned off, the LED will flash red twice.
Important: The 2W902R-SP is defaulted in HALF for START IT
systems. It must be changed to FULL for alarm systems.
Turns the silent mode on or off. If on, LED will flash blue. When
turned off, the LED will flash red twice.
Puts your remote into 2
vehicle with the same remote as long as it has the same RF Kit
installed. If on, LED will flash blue. When turned off, the LED will
Locks all buttons on the remote automatically after one minute.
Tap any button then the button(s) you would like to use to send a
command from the remote to your vehicle. If on, LED will flash
blue. When turned off, the LED will flash red twice.
LED Duration
Once every 5 seconds
Once every 5 seconds
Once every 5 seconds
Once or Twice depending on function
Three LED flashes
6
<Insert
Key/Start
Icon>
Auxiliary 2
Function / Description
nd
Car Mode. You can control another
flash red twice.
Chirp(s)
Six times
N/A
N/A
Once or Twice
depending on
function
Three chirps