Way Remote Button Functions - Firstech 2W902R-SP User Manual

2W902R-SP:
Turn the remote over and unlock the battery cover by sliding the clear tab up. Slide the battery cover off,
revealing the AAA battery. IMPORTANT: Be sure to observe correct polarity when installing the battery.
1WG7R-SP:
Use a quarter or flat head screwdriver to pry the back cover off of the remote. You can insert the quarter
or flat head in the small slot at the bottom of the remote by the keychain loop. Carefully pry off the back
cover using caution that you do not damage the circuit board. Your battery size should be listed on the
battery. Battery size: Two (2) CR2016) Replacements can be purchased from your local Firstech dealer
or an electronics store.

2 Way Remote Button Functions

Button Duration Function / Description
Half
Locks doors and if equipped, arms the alarm.
<Insert second
Lock
Icon> 4
Panic/vehicle locater (flashes vehicle's parking lights and sounds siren and horn).
seconds
Half
Unlocks doors and if equipped, disarms the alarm.
<Insert second
Unlock
Icon> 2.5
Run time extender. Resets the run time for Turbo Timer or Remote Start.
seconds
<Insert
2.5
Trunk Trunk release. Triggers the trunk release output and opens the vehicle's trunk.
seconds
Icon>
Half
Car Check (updates vehicle status on remote) / Secure Auxiliary
<Insert second
Key
Icon>
2.5
Holding this button will start your vehicle. Repeat and this will shut your vehicle down.
seconds
<Insert
This button activates and deactivates multiple features. See the Function Button Menu table below for
Function
complete details.
Icon>
<Insert Half Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the
Lock + second alarm is triggered).
Unlock
Icon> 2.5
Turns the shock sensor on/off. (ALARM IT or MAX IT systems only)
seconds
<Insert Half
Valet mode (see Valet Mode Section for details)
Function second
and
Trunk 2.5
Option programming menu 1. For use during installation.
Icon> seconds
Half Activates timer start mode. Timer start mode has multiple programmable settings: duration
<Insert
second settings, temperature settings and self start settings.
Function
and Key
2.5
Icon> Option programming menu 2. For use during installation.
seconds
<Insert Half
Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
Trunk second
5