Displaying Current Vlans; Figure 3-61 Vlan Basic Information - SMC Networks TIGERSWITCH SMC6752AL2 Management Manual
Tigerswitch 10/100 48-port 10/100mbps fast ethernet managed switch
Hide thumbs
Also See for TIGERSWITCH SMC6752AL2:
- Specification sheet (2 pages) ,
- Installation manual (80 pages) ,
- Management manual (516 pages)
Table of Contents
Advertisement
Web – Click VLAN, 802.1Q VLAN, Basic Information.
CLI – Enter the following command.
Console#show bridge-ext
Max support vlan numbers:
Max support vlan ID:
Extended multicast filtering services: No
Static entry individual port:
VLAN learning:
Configurable PVID tagging:
Local VLAN capable:
Traffic classes:
Global GVRP status:
GMRP:
Console#
Displaying Current VLANs
The VLAN Current Table shows the current port members of each
VLAN and whether or not the port supports VLAN tagging. Ports
assigned to a large VLAN group that crosses several switches should use
VLAN tagging. However, if you just want to create a small port-based
VLAN for one or two switches, you can disable tagging.
Command Attributes (Web)
•
VLAN ID – ID of configured VLAN (1-4094).
•
Up Time at Creation – Time this VLAN was created (i.e., System Up
Time).
•
Status – Shows how this VLAN was added to the switch.
- Dynamic GVRP: Automatically learned via GVRP.
- Permanent: Added as a static entry.
Figure 3-61 VLAN Basic Information
VLAN C
ONFIGURATION
255
4094
Yes
IVL
Yes
No
Enabled
Enabled
Disabled
4-218
3-147
Advertisement
Table of Contents
