Switchport Private-Vlan Mapping - SMC Networks TIGERSWITCH SMC6752AL2 Management Manual
Tigerswitch 10/100 48-port 10/100mbps fast ethernet managed switch
Hide thumbs
Also See for TIGERSWITCH SMC6752AL2:
- Specification sheet (2 pages) ,
- Installation manual (80 pages) ,
- Management manual (516 pages)
Table of Contents
Advertisement
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
All ports assigned to an isolated VLAN can pass traffic between group
members, but must communicate with resources outside of the group
via a promiscuous port.
Example
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan isolated 3
Console(config-if)#
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no
form to remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id – ID of primary VLAN. (Range: 1-4094).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with
any other promiscuous ports in the same VLAN, and with the group
members within any associated secondary VLANs.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#
VLAN C
OMMANDS
4-215
Advertisement
Table of Contents
