Current Dhcp Mappings; System Log - SMC Networks 2585W-G User Manual

Eliteconnect 2.4ghz dual-radio 802.11g bridge

Hide thumbs Also See for 2585W-G:

Table of Contents

3.2.2. Current DHCP Mappings

Fig. 20. Current DHCP mappings.

On this page, all the current static or dynamic DHCP mappings are shown. A DHCP map-

ping is a correspondence relationship between an IP address assigned by the DHCP server

and a computer or device that obtains the IP address. A computer or device that acts as a

DHCP client is identified by its MAC address.

A static mapping indicates that the DHCP client always obtains the specified IP address from

the DHCP server. You can set static DHCP mappings in the Static DHCP Mappings section

of the DHCP Server configuration page (see Section 3.4.2). A dynamic mapping indicates

that the DHCP server chooses an IP address from the IP address pool from the DHCP

Server configuration page.

Fig. 21. System log.

System events are recorded in the memory of the SMC2585W-G. The logged information is

useful for troubleshooting purposes. The system events are divided into several categories,

and you can select which categories of events to log. See Section 3.6.2.3 for more informa-

tion.

Table of Contents

Smc2585w-g