Maintenance; Skill Levels; Maintenance Intervals - Shindaiwa EB633RT Owner's/Operator's Manual

MAINTENANCE

WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands
from sharp edges and hot surfaces.
WARNING
Operating a poorly maintained unit can result in serious injuries to operator or bystanders. Always follow all maintenance
instructions as written, otherwise serious personal injury may result.
Your unit is designed to provide many hours of trouble free service. Regular scheduled maintenance will help your unit achieve
that goal. If you are unsure or are not equipped with the necessary tools, we recommend that you take your unit to a Servicing
Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the Dealer do it, each maintenance
task has been graded. If the task is not listed, see your Dealer for repairs.

Skill Levels

Level 1 = Easy to do. Common tools may be required.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = See your dealer.
Click HERE or go to http://www.echo-usa.com/products/maintenance-kit
or
HERE https://www.shindaiwa-usa.com/you-can.aspx
For information about maintenance kits.

Maintenance Intervals

COMPONENT / SYSTEM
Air Filter
Choke Shutter
Fuel Filter
Fuel Cap Gasket
Fuel System
Spark Plug
Cooling System
Muffler Spark Arrestor
Cylinder Exhaust Port
Recoil Starter Rope
Screws/Nuts/Bolts
MAINTENANCE PROCEDURE LETTER CODES: I = INSPECT, R = REPLACE, C = CLEAN
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and your experience will determine the
frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
(1) Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity.
* All recommendations to replace are based on the finding of damage or wear during inspection.
MAINTENANCE
PROCEDURE
Inspect/Clean
Inspect/Clean
Inspect/Replace
Inspect/Replace
Inspect/Replace
Inspect/Clean/Replace
Inspect/Clean
Inspect/Clean/Replace
Inspect/Clean/Decarbon
Inspect/Clean
Inspect/Tighten/Replace
REQ'D
DAILY OR
SKILL
BEFORE USE
LEVEL
1
I / C *
1
I / C
1
1
1
I (1) *
1
2
I / C
2
2
1
I / C *
1
I *
EVERY
3 MONTHS YEARLY
REFUEL
R *
I *
I *
I (1) *
I / C / R *
I / C / R *
I / C
I / R *
R *
17