Maintenance And Care; Servicing Guidelines - Shindaiwa EB262 Operator's Manual

Servicing guidelines

Area
Air filter
Fuel filter
Spark plug
Carburettor
Cooling system
Exhaust system
Starter
Fuel system
Screws, bolts and nuts
IMPORTANT
Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.

Maintenance and care

If you have any questions or problems, please contact your shindaiwa dealer.
Cleaning air filter
1. Air filter cover
3. Element plate
Maintenance
Inspect / Clean / Replace
Inspect / Replace
Inspect / Clean / Adjust / Replace
Inspect
Inspect / Clean
Inspect / Tighten / Clean
Inspect
Inspect
Inspect / Tighten / Replace
2. Air filter
Maintenance and care
Maintenance and care
Page Before use
19
20
23
21
21
22
-
-
-
Tools required: 25-50 mm (1-2 in.) Cleaning brush
Parts required: Air filter
1. Move choke lever to
tering the carburettor throat when the air filter is removed.
Brush accumulated dirt from air cleaner area.
2. Remove air filter cover. Brush dirt from inside cover.
3. Remove air filter and element plate, and then lightly brush
debris from them. Replace filter if it is damaged, fuel soaked,
very dirty, or the rubber sealing edges are deformed.
4. If filter can be reused, be certain it:
 Fits tightly in the air filter cavity.
 Is installed with the original side out.
5. Install air filter cover.
19
Monthly
•
•
•
•
•
•
•
•
•
position. This prevents dirt from en-