Replacing The Aop30 Operator Panel; Figure 9-2 Replacement Of The Aop30 Operator Panel - Siemens SINAMICS SM120 Operating Instructions Manual

9.7.4

Replacing the AOP30 operator panel

To replace the AOP30 operator panel, proceed as follows:
1. Switch off the main circuit-breaker.
2. Open the cabinet.
3. Disconnect the power supply
4. Insert the retaining lugs
5. Snap in a new AOP30 operator panel.
6. Attach the connectors for the power supply and communications cable.
SINAMICS SM120 6SL38715
Operating Instructions 07/2015
①
Power supply
②
Communication cable
③
Retaining lug
Figure 9-2 Replacement of the AOP30 operator panel
①
communication cable
③
and pull the AOP30 operator panel to the front.
②
at the operator panel.
Maintenance
9.7 Repair
95