Commissioning - Siemens SINAMICS SM120 Operating Instructions Manual

Commissioning

Make sure that all of the cable connections between the cabinet modules are prepared. Use
the enclosed cable set.
Incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning and parameterization. This can
result in premature failures and subsequent damage to the drive and the drive system
components. This can result in death, serious injury or material damage. Incorrectly
performed commissioning can result in the warranty becoming null and void.
This drive may only be commissioned by electrical technicians that have been adequately
trained on this product, and have experience with commissioning this product and the
associated plant and system components. The electrical technician commissioning the
equipment must be trained on the specific product as a result of the differences between the
individual products, e.g. regarding topology and closed-loop control.
Obtain information about the range of SITRAIN training courses available through your local
contact person. Make use of the support and services offered by the responsible Siemens
Service Center when commissioning this equipment. You can find the relevant contact person
under "Service & Support".
SINAMICS SM120 6SL38715
Operating Instructions 07/2015
WARNING
7
75