3.3
Components
3.3.1
AOP30 operator panel
You can use the Advanced Operator Panel (AOP30) for operating, and diagnosing the drive.
The AOP30 communicates with the drive via a serial RS-232 interface with PPI protocol. The
interface is a point-to-point connection. The AOP30 has the master function in this
communication. The connected drive has the slave function.
Functions of the AOP30
Figure 3-1
The AOP30 has the following features and functions:
● Graphics-capable LCD with the following features
● Keypad for operational control of a drive
● Numeric keypad for the numeric input of parameter values
● 4 LEDs for indicating the operating state of the drive unit:
● Help function describing causes of and remedies for faults and alarms
SINAMICS SM120 6SL38715
Operating Instructions 07/2015
AOP30 operator panel
– Green backlighting for plain-text display
– Resolution of 240 x 64 pixels
– Quasi-analog bar-type display for process variables
– RUN: green
– ALARM: yellow
– FAULT: red
– LOCAL/REMOTE: green
Description
3.3 Components
29