Table of Contents
Advertisement
10 – Mixer
This recorder has a mixer function that allows you to set
the built-in effect, stereo balance and volume level for each
channel.
During mixdown (see "Mixdown" on page 59) and
playback, you can make fine adjustments to the recorded
sound by using this.
Making mixer settings
1.
From the Home screen, press the MIXER button to open
the Mixer Screen.
During 4-channel file playback
During overdubbing (mix) mode
During 4-channel file playback (MS decoding of channels 3/4)
2.
Use the . and / buttons and the + and – buttons
to move to and select the item that you want to adjust.
Each column is a channel and each row is a setting type.
3.
Press the ENTER/MARK button to open the setting
name and value in a pop-up window at the top right.
62
TASCAM DR-40X
4.
Use the + and – buttons to change the setting value.
Setting
Item
range
0–100
SEND
L12–C–R12
PAN/BAL
0–100
LVL
5.
Press the ENTER/MARK button to return to the previous
screen where you can select the next setting that you
want to adjust.
NOTE
i The mixer can be used when recording, in recording
standby, playing back, paused or stopped.
i Even when the Mixer Screen is open, you can use the
PLAY [7] button to start playback and the ¤ (HOME)
[8] button to pause playback.
i When the REC MODE screen MS DECODE item is on, MS
DECODE on the Mixer Screen Quick menu cannot be used,
and shows a message saying "Using by Input".
Operation details
Adjusts the send level (0
(min.)–100 (max.)) of the
selected effect used on the
signal (see "Setting the effect"
on page 61)
Adjusts left-right balance
(L12 (left)–C (center)–R12
(right))
Volume level
(0 (min.)–100 (max.))
Advertisement
Table of Contents
